Fiberglass 02250048734 Sullair Alternative Oil Separator Filter

Sullair 250034-085 02250048-734 OEM Compressor Air Oil Separator

The oil and air separator metal is normally electroplated and usually not corroded

Condensate may form in the separator depending on ambient conditions (temperature and humidity) and compressor conditions.
If the oil and air separator is not electroplated, a corrosion layer will be formed. This corrosion layer will damage the antioxidant of the compressor oil, which will significantly reduce its service life and oil flash point.

Product Superiority

Adopt anticorrosion efficient condensation of superfine fiber material as the main body, filter the system filter filter bed combination prediction filter layer, superfine fiber layer, support layer, filter layer and gravity sedimentation, etc, make the compressor output above 3 microns of solid particles in the air can filter out, all is the extremely small mu is about 0.01-1 m of the disintegration of oil and gas dissolved in through the filter is condensed into larger droplets, accumulate in the bottom of the filter, again through the return pipe of siphon filter at the bottom of the sunken place back to lubrication system so that the compressor discharge more pure and oil-free compressed air.

Product Parameter

• Filtration accuracy is 0.1 m.
• The oil content of compressed air can reach below 3ppm.
• The filter material is made of glass fiber from HV Company of Germany and Lydall company of America.

AIR OIL SEPARATOR — SEPARATES THE OIL FROM THE COMPRESSED AIR